Factory Direct: High-Quality Piercing Tap 4/0 - 1/0

Customization:	Available
Transport Package:	Cartons Pallets Wooden Case
Specification:	IEC IEEE

Basic Info.

HS Code

7616991090

Production Capacity

100000

Product Description

Terminal of Eye Conductive Preaislado Para 6 mm ², 10 AWG

  Insulation piercing capability eliminates the need for insulation stripping
    UL486B Listed, AL9CU Rated, for copper and aluminum conductor combinations up to 90°C, *600 Volt applications
    Insulation piercing design for use on hot-line applications eliminates the need for taping
    Easy snap-out tabs eases installation and protects connection from dirt and debris
    Simple bolt-on connection for ease of installation

Terminal of Compression platen bimetallic p/conductor Nº2 (1 hole)

Material name		Pre-insulated eye terminal for conductor 6mm ² No. 10 AWG
Material		Must be made of bimetallic aluminum and copper material, covered with a tin layer with Vinyl insulation
Finish		It must present a smooth surface, free of imperfections and defects
Welding		By friction
Rules		UL; CE and CSA
Quality certificate		ISO 9001
DN-DS certificate		Attach certificate of acceptance and approval
Identification mark		The name of the manufacturer and the range of application must be engraved on the terminal
Operating temperature	º C	105
Maximum voltage	v	600
Nominal size of the driver	AWG	#2
Section of the internal conductor of the terminal	mm²	6
Driver	AWG	10
Identification mark		Each terminal must present a symbol or brand of manufacturing
Packaging		The pre-insulated terminals should be packed in a highly resistant cardboard box identified with a label where it describes the No. 2 AWG gauge, manufacturer, quantity, country of origin

Bimetallic Terminal of compression for driver N º 2 AWG (2 holes)

Material name		Bimetallic Compression Terminal driver. No. 2 AWG- 2 hole
Material		º Must be made of material bimetallic terminal pads and connectors made of high conductivity copper and aluminum alloy coated with a tin layer, in order to increase its resistance to corrosion on the inside contain a structure and a compound that inhibits the galvanic couple, preventing corrosion and false contacts in the copper and aluminum joints. They have a bevel that facilitates the insertion of the driver and a full hole ensures that the connector or shoe is centered and perfectly sealed. For connections of terminals and splices up to 35 kv in aluminum cable.
Finish		It should present a smooth surface , free of imperfections and defects
Welding		By friction
Rules		ANCI C119.4, IEEE 48-1996
Quality certificate		ISO 9001
Identification mark		The name of the manufacturer and the range of application must be engraved on the terminal
Permissible driver 2 AWG		ACSR, AAC, AAAC, CU
Nominal size of the driver	AWG	#2
Diameter of the driver	mm	7.417
General Features
Internal diameter of drum	inch(mm	2/5 (10.12)
External diameter of drum	inch(mm	1/2 (13)
Holes	u	2
Identification color		Coffee
Dimension
Diameter of the hole	inch(mm)	9/16 (14.22)
Distance between holes	inch(mm)	¾-1 (19.05 -25.4)
Approximate Length (L)	inch(mm)	3.5 (89)
Approximate width (W)	inch(mm)	4/5 (20)
Approximate thickness	inch(mm)	0.12 (3.04)
Packaging		It should be packed in a box Highly resistant cardboard identified with a label where you describe caliber # 2 AWG, manufacturer, quantity, country of origin

Terminal of Compression Bimetallic p/conductor N º 4/0 AWG

Material name		Compression Connector Terminal Bimetallic terminal for driver No. 4/0 AWG
Material		It should be made of bimetallic aluminum and copper material, covered with a layer of tin, a In order to increase its resistance to corrosion.
Finish		It should present a smooth surface , free of imperfections and defects
Welding		By friction
Rules		ANCI C119.4, IEEE 48-1996
Quality certificate		ISO 9001
Approval certificate		Attach certificate of acceptance of DN-DS
Permissible driver 3/0	AWG	ACSR, AAC, AAAC, CU
Dimension
Nominal size of the driver	AWG	No. 4/0
Diameter of driver applying approximate	mm	13.25
Number of Holes	u	2
Identification color		Purple
Dimension
Diameter of the hole	inch(mm)	9/16 (14.29)
Distance between holes	inch(mm)	1-3 / 4 (44.45)
Approximate length (L)	inch(mm)	5.16 (131.1)
Width (W)	inch(mm)	1 (25.4)
Thickness	inch(mm)	0.18 (4.57)
Dialing		You must present the mark or symbol of the manufacturer
Packaging		It should be packed in a box Highly resistant cardboard identified with a label describing the caliber # 2 AWG, manufacturer, quantity, country of origin

Terminal of Compression Bimetallic p/conductor N º 336.4 MCM

Material name		Bimetallic Compression Terminal for driver No. 336.4 MCM.
Material		It should be made of material bimetallic terminal pads and connectors made of high conductivity copper and aluminum alloy coated with a tin layer, in order to increase its resistance to corrosion on the inside contain a structure and a compound that inhibits the galvanic couple, preventing corrosion and false contacts in the copper and aluminum joints. They have a bevel that facilitates the insertion of the driver and a full hole ensures that the connector or shoe is centered and perfectly sealed. For connections of terminals and splices up to 35 kv in aluminum cable.
Rules		ANSI C119.4, IEEE 48-1996
Quality certificate		ISO 9001
Approval certificate		Attach DN-DS certificate
Finish		It should present a smooth surface , free of imperfections and defects
Welding		By friction
Admitted drivers		ACSR, AA, AAAC
Nominal size of the driver		3356.4 MCM
Diameter of the driver that applies	mm	15.6
Characteristics
Color code		Red
Number of holes	u	2
Diameter of the hole	inch(mm)	9/16 (14.28)
Bolt diameter	inch(mm)	½ (12.7)
Dimension
Length between holes center	inch(mm)	1-3 / 4 (44.5)
Identification mark		The terminals of the connectors they must be marked with the manufacturer's symbol, catalog number, application conductor ranges and die number to occupy with the hydraulic tool for installation. When this information is not possible to be presented in the body of the connector, it will be printed on the connector bag, except for the brand and the name of the manufacturer, which must necessarily be indicated on the body of the connector. Additionally, they will present marks for their correct location and compression when they are installed
Packaging		It should be packed in a box Highly resistant cardboard identified with a label where you describe caliber # 2 AWG, manufacturer, quantity, country of origin

Terminal of compression Bimetallic p/conductor N º 3/0

4	Material name		Compression Connector Terminal Bimetallic terminal for driver No. 3/0 AWG
5	Material		It should be made of bimetallic aluminum and copper material, covered with a layer of tin, a In order to increase its resistance to corrosion.
6	Finish		It should present a smooth surface , free of imperfections and defects
7	Welding		By friction
8	Rules		ANCI C119.4, IEEE 48-1996
9	Quality certificate		ISO 9001
10	Approval certificate		Attach certificate of acceptance of DN-DS
11	Permissible driver 3/0	AWG	ACSR, AAC, AAAC, CU
12	Dimension
13	Nominal size of the driver	AWG	No. 3/0
	Diameter of driver applying approximate	mm	11.53
14	Number of Holes	u	2
15	Identification color		Orange
	Dimension
16	Diameter of the hole	inch(mm)	9/16 (14.29)
17	Distance between holes	inch(mm)	1-3 / 4 (44.45)
18	Approximate length (L)	inch(mm)	3- 1/7 (80)
19	Width (W)	inch(mm)	Specify
20	Thickness	inch(mm)	0.18 (4.57)
21	Dialing		You must present the mark or symbol of the manufacturer
22	Packaging		It should be packed in a box Highly resistant cardboard identified with a label describing the caliber # 2 AWG, manufacturer, quantity, country of origin

bimetallic Terminal of compression for driver N º 2 AWG (2 holes)

4	Material name		Bimetallic Compression Terminal driver. No. 1/0 AWG, two hole
5	Material		It should be made of material bimetallic aluminum and copper, coated with a layer of tin, in order to increase its resistance to corrosion.
6	Finish		It should present a smooth surface , free of imperfections and defects
7	Welding		By friction
8	Rules		ANCI C119.4, IEEE 48-1996
9	Quality certificate		ISO 9001
10	Identification mark		The name of the manufacturer and the range of application must be engraved on the terminal
11	Permissible driver 2 AWG	AWG	ACSR, AAC, AAAC, CU
12	Nominal size of the driver	AWG	# 1/0
13	Driver's diameter what applies	mm	9.14
14	Holes	u	2
15	Identification color		pink
	Dimension
16	Diameter of the hole	inch(mm)	9/16 (14.22)
17	Distance between holes	inch(mm)	1-3 / 4 (44.45)
18	Approximate Length (L)	inch(mm)	4.2 (106)
19	Approximate width (W)	inch(mm)	4/5 (20)
20	Approximate thickness	inch(mm)	0.18 (4.57)
21	Packaging		It should be packed in a box Highly resistant cardboard identified with a label where you describe caliber # 2 AWG, manufacturer, quantity, country of origin

Splice full traction ACSR - AAAC No. 4/0 AWG

4	Material name		Full traction joint for driver ACSR-AAAC No. 4/0 AWG
5	Splicing standards		ANSI C119.4, ASTM D 566
6	ISO Certificate		9001 or recent
7	Splice class		TO
8	Raw material of the driver		Aluminium alloy
9	Design of the splice to full traction		The tubular or cylindrical body made of aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they have been designed and with a stop inside, filled with inhibitor compound.
10	Splice fabrication		The joints must be designed with the materials of the best quality, allowing to fulfill their function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee the resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion.
11	Calibers of drivers	mm	ACSR 4/0
12	Diameter of the driver	mm	14.3
13	Sleeve length	mm	420
14	Central diameter of the splice	mm	39
15	Maximum tension	dAN	3,787
16	Color		Pink-Pink
17	The splice nozzles must present		You must present a stopper on both ends sealant that prevents the entry of moisture and external agents into its interior that lead to corrosion of the same, similarly must fulfill the function of maintaining the inhibiting fat inside the splice during transport and storage
18	Identification Mark		You must submit a print on the body of the material name of the manufacturer, measure of conductor, tension, minimum pressure of the press
19	Packaging		The hose couplings of Full traction compression should be packed in a highly resistant cardboard box in order to protect in the transport and handling of the material

Connector, Piercing Tap 4/0 - 1/0 - 6AWG.

Splice full traction ACSR-AAAC No. 1/0 to 1/0 AWG

4	Material name		Full traction joint for driver ACSR-AAAC No. 1/0 to 1/0 AWG +
5	Splicing standards		ANSI C119.4, ASTM D 566
6	ISO Certificate		9001 or recent
7	Splice class		TO
8	Raw material of the driver		Aluminium alloy
9	Design of the splice to full traction		The tubular or cylindrical body made of aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they have been designed and with a stop inside, filled with inhibitor compound.
10	Splice fabrication		The joints must be designed with the materials of the best quality, allowing to fulfill their function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee the resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion.
11	Calibers of drivers	mm	ACSR 1/0
12	Diameter of the driver	mm	10.12
13	Sleeve length	mm	300 to 330
14	Central diameter of the splice	mm	28 to 32
15	Maximum tension	dAN	1600
16	Color		Yellow-yellow
17	The splice nozzles must present		You must present a stopper on both ends sealant that prevents the entry of moisture and external agents into its interior that lead to corrosion of the same, similarly must fulfill the function of maintaining the inhibiting fat inside the splice during transport and storage
18	Identification Mark		You must present the engraving on the body of the material, name of the manufacturer, measure of the driver, tension, minimum pressure of the press

Splice full traction ACSR-AAAC No. 2 to 2 AWG
Splice full traction ACSR MCM AWG No. 336.4 LINNET

Splice full traction ACSR-AAAC No. 4 AWG

4	Material name		Full traction joint for driver ACSR -AAAC No. 2 to 2 AWG
5	Splicing standards		ANSI C119.4, ASTM D 566
6	ISO Certificate		9001 or recent
7	Splice class		TO
8	Raw material of the driver		Aluminium alloy
9	Design of the splice to full traction		The tubular or cylindrical body made of aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they have been designed and with a stop inside, filled with inhibitor compound.
10	Splice fabrication		The joints must be designed with the materials of the best quality, allowing to fulfill their function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee the resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion.
11	Finish		The joint shall not present cracks, cavities, welds superficial or internal defects, or any other that may affect its correct functioning.
12	Calibers of drivers		ACSR 2
13	Diameter of the driver	mm	8.05
14	Splice length	mm	300 to 320
15	Central diameter of the splice	mm	25
16	Maximum tension	dAN	1150
17	Color		Red
18	The splice nozzles must present		a sealing cap that prevents the entry of moisture and external agents into its interior that lead to corrosion of the same, similarly must fulfill the function of maintaining inhibitory fat inside the splice during transport and storage
19	DN-DS certificate		Attach acceptance certificate and homologation
20	Identification Mark		You must present the engraving on the body of the material, name of the manufacturer, measure of the driver, tension, minimum pressure of the press
21	Packaging		Pre-insulated compression sleeve splices must be packed in a highly resistant cardboard box in order to protect in the transportation and handling of the material

variety of connector products to fit most distribution applications. Installation methods may be automatic, bolted, or compression to connect various sizes and types of popular conductors (aluminum, copper, or bi-metallic) and support wires.

4	Material name		Full traction joint for driver ACSR -AAAC Nº4 AWG
5	Splicing standards		ANSI C119.4, ASTM D 566
6	ISO Certificate		9001 or recent
7	DN-DS certificate		Attach certificate of acceptance and approval
8	Splice class		TO
9	Raw material of the driver		Aluminium alloy
10	Design of the splice to full traction		The tubular or cylindrical body made of aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they have been designed and with a stop inside, filled with inhibitor compound.
11	Splice fabrication		The joints must be designed with the materials of the best quality, allowing to fulfill their function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee the resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion.
12	Finish		The joint shall not present cracks, cavities, welds superficial or internal defects, or any other that may affect its correct functioning.
13	Calibers of drivers		ACSR 4
14	Diameter of the driver	mm	5.80 to 6.45
15	Splice length	mm	260
16	Central diameter of the splice	mm	23
17	Maximum tension	dAN	1150
18	Color		Orange
19	The splice nozzles must present		a sealing cap that prevents the entry of moisture and external agents into its interior that lead to corrosion of the same, similarly must fulfill the function of maintaining inhibitory fat inside the splice during transport and storage
20	Identification Mark		You must present the engraving on the body of the material, name of the manufacturer, measure of the driver, tension, minimum pressure of the press
21	Packaging		Pre-insulated compression sleeve splices must be packed in a highly resistant cardboard box in order to protect in the transportation and handling of the material

Full pre-siled traction joint for driver No.

4	Material name		Pre-insulated compression sleeve coupling 4/0 to 4/0 AWG
5	Raw material of the driver		Tube or solid bar made of aluminum alloy
6	Insulation material		Thermoplastic resistant to compression shall be such that it must guarantee the values of dielectric strength
7	Pre-insulated compression splice design		tubular or cylindrical body made of aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they have been designed and with a stop inside, filling a minimum of 20% of its capacity of neutral anti-humidity grease and to prevent its exit will be supplied properly plugged at both ends
8	Rules		ANSI C119.4, ASTM D 566
9	ISO Certificate		9001 or recent
10	Approval certificate		Attach the acceptance certificate DN-DS
9	Finish		The joints must be designed with the best quality materials, allowing to fulfill its function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion. The joint must not have cracks, cavities, welds superficial or internal defects, or any other that may affect its proper functioning.
10	Main range of driver input	AWG	4/0
11	Output range	AWG	4/0
12	Admissible section	mm²	107.2
13	Approximate length	inch(mm)	5-1 / 2 (139.7)
14	Approximate maximum diameter of the sleeve	inch(mm)	0.564 (14.32)
15	Approximate minimum diameter of the sleeve	inch(mm)	0.522 (13.25)
16	Maximum tension	daN	2,940
17	Color A-B		Pink-Pink
18	Identification Mark		Each splice must present the engraving on the body, name of the manufacturer, country of origin, range of driver, tension.
19	Packaging		The hose couplings of Pre-insulated compression should be packed in a highly resistant cardboard box in order to protect in the transport and handling of the material

	Specify code and attach technical catalog of the model proposed by the manufacturer
	Full pre-siled traction joint for driver No. 2
	Tube or solid bar aluminium alloy
	Compressive thermoplastic will be such that it must guarantee the values of the Dielectric strength
	The tubular or cylindrical body manufactured in aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they were designed and with a stop inside, filling a minimum of 20% of its capacity of neutral anti-humidity grease and in order to avoid its exit, it will be properly sealed at both ends
	ANSI C119.4, ASTM D 566
	The joints must be designed with the best quality materials, allowing to fulfill its function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion. The joint must not have cracks, cavities, welds superficial or internal defects, or any other that may affect its proper functioning.
mm	AAAC 2 AL 2
mm²	33.62
inch(mm)	3-15 / 16 (100)
inch(mm)	4/5 (20
daN	1,100
	Red Red
	You must present engraving on the body name of the manufacturer, measure of Driver, tension,
	The connectors must be packed in a highly resistant cardboard box for your transport, storage and handling

4	Material name		Full traction joint for driver ACSR-AAAC No. 3/0 AWG
5	Splicing standards		ANSI C119.4, ASTM D 566
6	ISO Certificate		9001 or recent
7	Splice class		TO
8	Raw material of the driver		Aluminium alloy
9	Design of the splice to full traction		The tubular or cylindrical body made of aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they have been designed and with a stop inside, filled with inhibitor compound.
10	Splice fabrication		The joints must be designed with the materials of the best quality, allowing to fulfill their function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee the resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion.
11	Calibers of drivers	mm	ACSR 3/0
12	Diameter of the driver	mm	12.75
13	Sleeve length	mm	380 to 410
14	Central diameter of the splice	mm	36 to 40
15	Maximum tension	dAN	2,940
16	Color		Pink- black
17	The splice nozzles must present		You must present a stopper on both ends sealant that prevents the entry of moisture and external agents into its interior that lead to corrosion of the same, similarly must fulfill the function of maintaining the inhibiting fat inside the splice during transport and storage
18	Identification Mark		You must submit a print on the body of the material name of the manufacturer, measure of conductor, tension, minimum pressure of the press
19	Packaging		The hose couplings of Full traction compression should be packed in a highly resistant cardboard box in order to protect in the transport and handling of the material

8	Rules		ANCI C119.4, IEEE 48-1996
9	Quality certificate		ISO 9001
10	Approval certificate		Attach certificate of acceptance of DN-DS
11	Permissible driver 3/0	AWG	ACSR, AAC, AAAC, CU
12	Dimension
13	Nominal size of the driver	AWG	No. 3/0
	Diameter of driver applying approximate	mm	11.53
14	Number of Holes	u	2
15	Identification color		Orange
	Dimension
16	Diameter of the hole	inch(mm)	9/16 (14.29)
17	Distance between holes	inch(mm)	1-3 / 4 (44.45)
18	Approximate length (L)	inch(mm)	3- 1/7 (80)
19	Width (W)	inch(mm)	Specify
20	Thickness	inch(mm)	0.18 (4.57)
21	Dialing		You must present the mark or symbol of the manufacturer
22	Packaging		It should be packed in a box Highly resistant cardboard identified with a label describing the caliber # 2 AWG, manufacturer, quantity, country of origin

Product	Tension Clamp 100-150mm Square
Test Items	Test Content	Test Result
Test Items	Test Content	Sample 1	Sample 2	Sample 3	Sample 4	Sample 5	Remarks
Visual Inspection	Crack	√	√	√	√	√	1) Passed Mark"√" 2) Not Passed Mark"×" Test Conclusion:
	Stoma Trachoma	√	√	√	√	√
	Fins	√	√	√	√	√
	Burr	√	√	√	√	√
Mechanical Characteristics	Mechanical Load	√	√	√	√	√	1)Passed Mark"√" 2)Not Passed Mark"×" Test Conclusion:
Inspector	Date: 18. June,2010 Approved:

S/N	DETAILS	UNITS	DATA
1.	Type		100mm2 Compression type mid span joint complete with a tubular aluminium outer extrusion ,steel inner sleeve and two filler plugs
2.	Material for outer extrusion		Aluminium -99.5% purity
3.	Material for inner sleeve		HDG steel
4.	Type of inner sleeve		Tubular, suitable for compression into hexagonal shape
5.	Suitable for the following ACSR Conductor Size	mm2	100
6.	Resistivity		Less than 75% of the resistivity of an equivalent length of conductor.
7.	Minimum failing load	kN	35
8.	Operating ambient temperature	°C	-1 to 40
9.	Relative Humidity	%	85
10.	Altitude above sea level	m	1400

CLAMP P/G ALUMINIUM/ALUMINIUM 100/100 MM2

S/N	TYPE	CONDUCTOR CROSS SECTION AREAS (mm2)	NUMBER AND MATERIAL OF BOLT	CLAMP BODY MATERIAL	DIMENSI ONS
1.	Aluminium/Aluminiu m conductor connection	100/100	2 X Galvanised mild steel bolts	Aluminium	As per Drawing No.E11389 shown below
	Other dimensions
2.	Drawings showing dimensions to be provided with bid	Yes/No	Yes
3.	Previous type tests results/certificate to be provided with bid	Yes/No	Yes
4.	Quality assurance certificate to be provided with bid	Yes/No	Yes
5.	Applicable standard		IEC standards

4	Material name		Full traction joint for driver ACSR MCM No. 336.4 AWG LINNET
5	Splicing standards		ANSI C119.4, ASTM D 566
6	ISO Certificate		9001 or recent
7	Splice class		TO
8	Raw material of the driver		Aluminium alloy
9	Design of the splice to full traction		The tubular or cylindrical body made of aluminum, with holes in each of its ends, with the corresponding dimensions for the entry of the conductors for which they have been designed and with a stop inside, filled with inhibitor compound.
10	Splice fabrication		The joints must be designed with the materials of the best quality, allowing to fulfill their function without any problem, they must be stable and unalterable with time and the alloys used for their manufacture must not form galvanic couple that causes the degradation of the surfaces in contact, they must also guarantee the resistance to aggressive environments, chemical agents, humidity and any condition harmful to corrosion.
11	Calibers of drivers	mm	ACSR MCM 336.4 AWG
12	Diameter of the driver	mm	19.39 a 18
13	Sleeve length	mm	530
14	Central diameter of the splice	mm	48
15	Maximum tension	dAN	5,000
16	Color Of plugs		green
17	The splice nozzles must present		You must present a stopper on both ends sealant that prevents the entry of moisture and external agents into its interior that lead to corrosion of the same, similarly must fulfill the function of maintaining the inhibiting fat inside the splice during transport and storage
18	Identification Mark		You must submit a print on the body of the material name of the manufacturer, measure of conductor, tension, minimum pressure of the press
19	Packaging		The hose couplings of Full traction compression should be packed in a highly resistant cardboard box in order to protect in the transport and handling of the material

Connector, Piercing Tap 4/0 - 1/0 - 6AWG.

Products Details

Basic Info.

Product Description

Featured Products

Contact us